Convergence criteria next up previous contents
Next: Three-Dimensional Navier-Stokes Calculations Up: Aerodynamic and hydraulic networks Previous: Calculating the residual and   Contents

Convergence criteria

Convergence is checked for the total temperature, mass flow, total pressure and geometry separately. Convergence is reaches if the change in solution in the last iteration does not exceed $ 10^{-4}x5x10^{-3}$ of the largest change in this network calculation or $ 10^{-8}$ times the largest absolute value within the network (cf. checkconvnet.c).



guido dhondt 2012-10-06