*GAP CONDUCTANCE next up previous contents
Next: *HEADING Up: Input deck format Previous: *GAP   Contents


Keyword type: model definition, surface interaction

This option allows for the definition of the conductance across a contact pair. The conductance is the ratio of the heat flow across the contact location and the temperature difference between the corresponding slave and master surface. Right now, gap conductance is only taken into account for penalty contact. The gap conductance is a property of the nonlinear contact spring elements generated during contact. This means that heat flow will only take place at those slave nodes, at which a contact spring element was generated. Whether or not a contact spring element is generated depends on the pressure-overclosure relationship on the *SURFACE BEHAVIOR card.

The conductance coefficient can be defined as a function of the contact pressure and the mean temperature of slave and master surface. Alternatively, the conductance can be coded by the user in the user subroutine gapcon.f, cf Section 8.4.11. In the latter case the option USER must be used on the *GAP CONDUCTANCE card.

First line:

Following sets of lines define the conductance coefficients in the absence of the USER parameter: First line in the first set:

Use as many lines in the first set as needed to define the conductance versus pressure curve for this temperature.

Use as many sets as needed to define complete temperature dependence.



defines a conductance coefficient with value $ 100.$ for all contact pressures and all temperatures.

Example files: .

next up previous contents
Next: *HEADING Up: Input deck format Previous: *GAP   Contents
guido dhondt 2012-10-06